Trace/Channel | Stimulus | Response | Display | Calibration | Markers | Analysis | Save/Recall | System | Remote Only
Calibration | Calibrate: | Meas STDs | Adapter Rem/Ins | Unknown Thru | Cal Kit: | Define STDs | Specify CLS | Power Cal | Receiver Cal | Mixer/Converter Cal: Scalar | Vector | Port Extension: | Auto Port Ext | System Z0 | AutoCal | Remote Only: AutoCal | Misc Commands | R/W Meas of Cal STDs | R/W Cal Coefficients
note |
This icon This icon Comments are in italics. |
indicates a read only command. This icon 
indicates a write only command.
Calibration |
|
|---|---|
Correction (ON/OFF) |
|
Cal Trig Source (Internal | System) |
|
Calibrate |
||
|---|---|---|
|
Response (Open) |
|
|
Response (Short) |
|
|
Response (Thru) |
|
Method |
Full 1-Port Cal |
|
|
One Path 2–Port Cal |
|
|
2-Port (SOLT) Cal |
|
|
2-Port TRL Cal |
|
Multiline TRL (ON/OFF) |
||
Apply |
||
Cancel |
||
Calibration method query |
||
Measurement of Calibration Standards (Calibrate) |
||
|---|---|---|
For calibrations: •Response •Full 1–Port Cal •One Path 2–Port Cal •2–Port SOLT Cal |
Open |
|
Short |
||
Load |
||
Thru |
||
Isolation (Optional) |
||
In calibration: •2–Port TRL Cal |
1-2 Thru/Line |
|
Port n Reflect |
||
1-2 Line/Match |
||
Subclass number |
||
Adapter Removal/Insertion (Calibrate) |
|
|---|---|
Select Port |
|
Adapter Delay |
|
Adapter Media (Coaxial | Waveguide) |
|
Delay Unit (Seconds | Meters) |
|
Permittivity |
|
Cutoff Frequency |
|
Unknown Thru Addition (Calibrate) |
|
|---|---|
Thru Delay |
|
Thru Media (Coax | Waveguide) |
|
Delay Unit (Seconds | Meters) |
|
Permittivity |
|
Cutoff Frequency |
|
Complete 2-Port Calibration |
|
Cal Kit |
|
|---|---|
Select |
|
Description (Cal Kit table) |
|
Label (Cal Kit table) |
|
Restore Cal Kit |
|
Save To File |
|
Load From File |
|
Define STDs (Cal Kit) |
|
|---|---|
Add STD |
|
Delete STD |
|
Define STD Data |
|
Define STDs (The count of standards in the selected calibration kit is equal to the number of rows in the Standards table) |
|
*The following are the column labels in the Table of Standards: |
|
Standard_Type |
|
Standard_Label |
|
Frequency_Fmin |
|
Frequency_Fmax |
|
Offset_Delay |
|
Offset_Z0 |
|
Offset_Loss |
|
Terminal Impedance (Load) |
|
C0 10–15 F (Open) |
|
C1 10–27 F/Hz (Open) |
|
C2 10–36 F/Hz2 (Open) |
|
C3 10–45 F/Hz3 (Open) |
|
L0 10–12 H (Short) |
|
L1 10–24 H/Hz (Short) |
|
L2 10–33 H/Hz2 (Short) |
|
L3 10–42 H/Hz3 (Short) |
|
Specify CLS (Cal Kit) |
|
|---|---|
*The following are the column labels in the Table of calibration standard classes: |
|
Subclass n (Select column) |
|
Load Port x (Fill row) |
|
Open Port x (Fill row) |
|
Short Port x (Fill row) |
|
Thru Port x-y (Fill row) |
|
TRL Line Port x-y (Fill row) |
|
TRL Thru Port x-y (Fill row) |
|
TRL Reflect Port x-y (Fill row) |
|
Power Calibration |
|
|---|---|
Power Sensor Zero Correction |
|
Take Cal Sweep |
|
Correction (ON/OFF) |
|
Loss Compensation (ON/OFF) |
|
Loss Compen (data) |
|
Export Loss Table |
|
Import Loss Table |
|
Status of power correction (Interpolation/extrapolation) |
|
Power correction data |
|
Receiver Calibration |
|
|---|---|
Correction (ON/OFF) |
|
Calibrate Test Receiver |
|
Calibrate Reference Receiver |
|
Calibrate Both |
|
Power Offset |
|
Scalar (Mixer Calibration) |
|
|---|---|
Select ports |
|
Direction (Forward | Revers | Both) |
|
Port n Open |
|
Port n Short |
|
Port n Load |
|
Port n-m Thru |
|
Power |
|
Measure STDs Using ACM |
|
Apply |
|
Cancel |
|
Clear calibration coefficients |
|
Vector (Mixer Calibration) |
|
|---|---|
Select Port |
|
LO Frequency |
|
IF Frequency (RF+LO | RF-LO | LO-RF) |
|
Open |
|
Short |
|
Load |
|
Save To Touchstone File |
|
Execute Using ACM |
|
Setup Option (ON/OFF) |
|
Port Extension |
|
|---|---|
Extension (ON/OFF) |
|
Extension Port n |
|
Loss1 (ON/OFF), Loss2 (ON/OFF) |
|
Freq1, Freq2 |
|
Loss1, Loss2 |
|
Loss at DC |
|
Auto (Port Extension) |
|
|---|---|
Select Port(s) |
|
Method (Current span | Active Marker | User Span) |
|
Include Loss (ON/OFF) |
|
Adjust Mismatch (ON/OFF) |
|
User Span Start |
|
User Span Stop |
|
Auto Port Extension |
|
Measure Short, Measure Open |
|
System Z0 |
|
|---|---|
System Z0 |
|
Port n Z0 |
|
Auto Select Z0 (ON/OFF) |
|
AutoCal Module |
|
|---|---|
1-Port AutoCal > Port n |
|
One Path 2–Port AutoCal > Port n->m |
|
2-Port AutoCal |
|
Characterization |
|
Auto-Orientation (ON/OFF) |
|
Execute Auto-Orientation |
|
Port n (Orientation) |
|
Unkn Thru (ON/OFF) |
|
Thermo Compensation (ON/OFF) |
|
Characterization Info… |
|
Confidence Check |
|
AutoCal
|
|
|---|---|
Set "CHECK" |
|
Set "THRU" |
|
Characterization data |
|
Characterization frequency array |
|
Number of characterization points |
|
Set port Impedance (OPEN|SHORT|LOAD) |
|
Readiness status |
|
Temperature of module |
|
Misc Calibration Commands
|
|
|---|---|
Clears the table of calibration coefficients |
|
Calibration Information |
|
Interpolation/extrapolation status of error correction |
|
Read/Write Measurement Data of Calibration Standards
|
|
|---|---|
Thru Reflection |
|
Thru Transmission |
|
Load |
|
Open |
|
Short |
|
Isolation |
|
Read/Write Calibration Coefficients
|
||
|---|---|---|
Sets method before activation |
Response Open |
|
Response Short |
||
Response Thru |
||
One-path two-port |
||
Full one-port |
||
Full two-port |
||
Calibration coefficient data read/write |
||
Activates written calibration coefficients |
||
