SCPI Command
SENSe<Ch>:CORRection:COEFficient:SAVE
Enables the written calibration coefficients depending on the selected calibration type. On completion of the command, the error correction automatically turns ON. Executing this command before all necessary calibration coefficients have been written will result in an error and the command will be ignored. |
---|
no query |
Channel <Ch>,
<Ch>={[1]|2|...16}
Calibration type selection:
Calibration coefficient writing:
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COEFficient.SAVE
app.SCPI.SENSe(Ch).CORRection.COEFficient.SAVE
Method
Back to SENSe
Back to Command Finder