SCPI Command
SENSe<Ch>:CORRection:COEFficient:METHod[:RESPonse]:THRU <rcvport>, <srcport>
Description
Selects the ports and sets the response calibration (Thru) type when the written calibration coefficients are made effective by the SENS:CORR:COEF:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<rcvport> |
The number of the receiver port from 1 to 2 |
<srcport> |
The number of the source port from 1 to 2 |
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COEFficient.METHod.RESPonse.THRU
Syntax
Ports = Array(1, 2)
app.SCPI.SENSe(Ch).CORRection.COEFficient.METHod.RESPonse.THRU = Ports
Type
Variant (array of Long) (write only)
Back to SENSe
Back to Command Finder
Rev.: 24.2