SCPI Command
SENSe<Ch>:CORRection:VMC:COLLect:LO:FREQuency <numeric>
SENSe<Ch>:CORRection:VMC:COLLect:LO:FREQuency?
Sets or reads out the LO frequency value used in the vector mixer calibration. The LO source is an external signal generator. The LO frequency is common for both the calibration and the mixer under test. |
---|
command/query |
Channel <Ch>,
<Ch>={[1]|2|...16}
<numeric> LO frequency from 0 to 1000 THz
<numeric>
Hz (Hertz)
0
Calibration > Mixer/Converter Calibration > Vector Mixer Calibration > LO Frequency
Equivalent COM Command
None
Back to SENSe
Back to Command Finder