Trace/Channel | Stimulus | Response | Display | Calibration | Markers | Analysis | Save/Recall | System | Remote Only
Fixture Simulator: | Port ZConversion | De-Embedding | Embedding | Time Domain: | Cable Correction | Gating | Conversion | Limit Test | Ripple Limit | Remote Only
note |
This icon This icon Comments are in italics. |
indicates a read only command. This icon 
indicates a write only command.
Port ZConversion (Fixture Simulator) |
||
|---|---|---|
Port ZConversion (ON/OFF) |
||
Port n Z0 Real |
||
The command sets: |
Port n Z0 Real = value Port n Z0 Imag = zero |
|
Port n Z0 Imag |
||
Theory (Travelling Waves | Power Waves) |
||
De-Embedding (Fixture Simulator) |
|
|---|---|
De-Embedding (ON/OFF) |
|
S–parameters File |
|
Port n (ON/OFF) |
|
Embedding (Fixture Simulator) |
|
|---|---|
Embedding (ON/OFF) |
|
S–parameters File |
|
Port n (ON/OFF) |
|
Time Domain |
||
|---|---|---|
Time Domain (ON/OFF) |
||
Unit (Seconds | Meters | Feet) |
||
Reflection Type (One Way | Round Trip) |
||
Start |
||
Stop |
||
Center |
||
Span |
||
Type (Bandpass | Lowpass Step | Lowpass Impulse) |
Bandpass/Lowpass |
|
Impulse/Step |
||
Impulse Width |
Bandpass/Lowpass Impulse |
|
Lowpass Step |
||
Kaiser-Beta |
||
Sets Frequency Low Pass |
||
Extrapolate DC (ON/OFF) |
||
DC Value |
||
Cable Correction (Time Domain) |
|
|---|---|
Cable Correction (ON/OFF) |
|
Velocity Factor |
|
Cable Loss |
|
Frequency |
|
Gating |
|
|---|---|
Gating (ON/OFF) |
|
Start |
|
Stop |
|
Center |
|
Span |
|
Type (Bandpass | Notch) |
|
Shape (Maximum | Wide | Normal | Minimum) |
|
DUT Low Pass |
|
Sets Frequency Low Pass |
|
Extrapolate DC (ON/OFF) |
|
DC Value |
|
Conversion |
|
|---|---|
Conversion (ON/OFF) |
|
Function (Z:Reflection | Z:Transmission | Y:Reflection | Y: Transmisson | 1/S:Inverse | Z:Trans-Shunt | Conjugation) |
|
Limit Test |
|
|---|---|
Limit Test (ON/OFF) |
|
Limit Line (ON/OFF) |
|
Edit Limit Line |
|
Save Limit Table |
|
Restore Limit Table |
|
Fail Sign (ON/OFF) |
|
Stimulus Offset |
|
Response Offset |
|
Marker -> Response Ofs |
|
Limit test result |
|
Limit test result report |
|
Number of failed points |
|
Stimulus values of failed points |
|
Ripple Limit |
|
|---|---|
Ripple Test (ON/OFF) |
|
Ripple Limit (ON/OFF) |
|
Ripple Value (OFF | Absolute | Margin) |
|
Ripple Value Band |
|
Edit Ripple Limit |
|
Save Ripple Limit Table |
|
Restore Ripple Limit Table |
|
Fail Sign (ON/OFF) |
|
Ripple limit test result |
|
Ripple limit test result report |
|
Remote only (Trace Analysis) |
|
|---|---|
Analysis type |
|
Execute analysis |
|
Analysis result data array |
|
Arbitrary sweep range (ON/OFF) |
|
Analysis range start |
|
Analysis range stop |
|
Coupling range (ON/OFF) |
|
Lower limit for the peak excursion value |
|
Number of points (data pairs) |
|
Peak polarity |
|
Target level |
|
Transition type |
|
