SCPI Command
CALCulate<Ch>[:SELected]:FILTer[:GATE]:TIME:CENTer <time>
CALCulate<Ch>[:SELected]:FILTer[:GATE]:TIME:CENTer?
Or
CALCulate<Ch>:TRACe<Tr>:FILTer[:GATE]:TIME:CENTer <time>
CALCulate<Ch>:TRACe<Tr>:FILTer[:GATE]:TIME:CENTer?
Description
Sets or reads out the gate center value of the gating function. |
|---|
command/query |
Target
CALCulate<Ch>[:SELected] — active trace of channel <Ch>,
Or
CALCulate<Ch>:TRACe<Tr> — trace <Tr> of channel <Ch>,
<Ch> = {[1]|2|...16}
<Tr> = {[1]|2|...16}
Parameter
<time> the center value of the gate, the range varies depending on the frequency span and the number of points
Unit
sec (second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Analysis > Gating > Center
Equivalent COM Command
SCPI.CALCulate(Ch).SELected.FILTer.GATE.TIME.CENTer
note |
This command is similar to CALCulate<Ch>[:SELected]:FILTer[:GATE]:TIME:CENTer only. |
Syntax
Value = app.SCPI.CALCulate(Ch).SELected.FILTer.GATE.TIME.CENTer
app.SCPI.CALCulate(Ch).SELected.FILTer.GATE.TIME.CENTer = 1e–8
Type
Double (read/write)
Back to CALCulate
Back to Command Finder
