Please enable JavaScript to view this site.

 Network Analyzers using S2VNA software

SCPI Command

CALCulate<Ch>[:SELected]:RLIMit:DATA <numeric list>

CALCulate<Ch>[:SELected]:RLIMit:DATA?

Or

CALCulate<Ch>:TRACe<Tr>:RLIMit:DATA <numeric list>

CALCulate<Ch>:TRACe<Tr>:RLIMit:DATA?

Description

Sets the data array, which is the limit line for the ripple limit function.

The array size is 1 + 4N, where N is the number of limit line segments.

For the n–th point, where n from 1 to N:

<numeric 1> the number of limit line segments N is the integer from 0 to 12. Setting 0 clears the limit line.

<numeric 4n–2> type of the n–th limit line segment

0: Off.

1: On

<numeric 4n–1> the stimulus value in the beginning point of the n–th segment

<numeric 4n–0> the stimulus value in the end point of the n–th segment

<numeric 4n+1> the ripple limit value of the n–th segment.

Note: If the array size is not 1 + 4N, where N is <numeric 1>, an error occurs. If <numeric 4n–2> is less than 0 or more than 1, an error occurs. When <numeric 4n–1>, <numeric 4n–0>, and <numeric 4n+1> elements are out of allowable range, the value is set to the limit, which is closer to the specified value.

command/query

Target

CALCulate<Ch>[:SELected] — active trace of channel <Ch>,

Or

CALCulate<Ch>:TRACe<Tr> — trace <Tr> of channel <Ch>,

<Ch> = {[1]|2|...16}

<Tr> = {[1]|2|...16}

Query Response

<numeric 1>, <numeric 2>, …<numeric 4N+1>

Equivalent Softkeys

Analysis > Ripple Limit > Edit Ripple Limit


Equivalent COM Command

SCPI.CALCulate(Ch).SELected.RLIMit.DATA


note

This command is similar to CALCulate<Ch>[:SELected]:RLIMit:DATA only.


Syntax

Data = app.SCPI.CALCulate(Ch).SELected.RLIMit.DATA

app.SCPI.CALCulate(Ch).SELected.RLIMit.DATA = Array(1,1,800,900,10)

Type

Variant (array of Double) (read only)


 

Back to CALCulate

Back to Command Finder

 

Rev.:  24.2