SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0:REAL <numeric>
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0:REAL?
Sets or reads out the real part of the impedance of the port impedance conversion function. |
---|
command/query |
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2}
<numeric> the impedance value from 1e–6 to 1e10
Ω (Ohm)
Sets the value of the limit, which is closer to the specified value.
<numeric>
50 Ω
Analysis > Fixture Simulator > Port Z Conversion > Port n Z0 Real
Equivalent COM Command
None
Back to CALCulate
Back to Command Finder