SCPI Command
SYSTem:COMMunicate:PSENsor:ZEROing
Description
Executes the zeroing procedure of the power sensor. Note: Unlike the zeroing procedure in the user interface, this command does not turn off the RF power on the VNA ports. The power meter sensor must be disconnected from the VNA port, or the OUTP command must be used to turn off the RF power. |
|---|
no query |
Related Commands
Equivalent Softkeys
Calibration > Power Calibration > Power Sensor Zero Correction
Equivalent COM Command
None
Back to SYSTem
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1