SCPI Command
SENSe<Ch>:CORRection:COLLect:DATA:THRU:MATCh <rcvport>,<srcport>,<numeric list>
SENSe<Ch>:CORRection:COLLect:DATA:THRU:MATCh? <rcvport>,<srcport>
Description
Writes or reads out the array of the reflection measurement of the thru standard connected between the receiver port <rcvport> and the source port <srcport>. The array size is 2N, where N is the number of measurement points. For the n–th point, where n from 1 to N: <numeric 2n–1> real part of the measurement <numeric 2n> imaginary part of the measurement |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<rcvport> |
The number of the receiver port from 1 to 2 |
<srcport> |
The number of the source port from 1 to 2 |
<numeric list> |
The data array of the reflection measurements using the thru standard |
Query Response
<numeric 1>, <numeric 2>, …<numeric 2N>
Related Commands
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.DATA.THRU.MATCh(Pt_r,Pt_s)
Syntax
Data = app.SCPI.SENSe(Ch).CORRection.COLLect.DATA.THRU.MATCh(Pt_r, Pt_s)
app.SCPI.SENSe(Ch).CORRection.COLLect.DATA.THRU.MATCh(Pt_r, Pt_s) = Data
Type
Variant (array of Double) (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
