SCPI Command
SENSe:CORRection:PORT<Pt>:IMPedance[:INPut][:MAGNitude] <numeric>
SENSe:CORRection:PORT<Pt>:IMPedance[:INPut][:MAGNitude]?
Sets or reads out the impedance Z0 of port <Pt> |
---|
command/query |
Port <Pt>,
<Pt>={[1]|2}
<numeric> the Z0 value from 0.001 to 1000
Ω (Ohm)
Sets the value of the limit, which is closer to the specified value.
<numeric>
50 Ω
Calibration > System Z0 > Port n Z0
Equivalent COM Command
None
Back to SENSe
Back to Command Finder