< Current Product List
ACM4000T Automatic Calibration Module
Copper Mountain Technologies is announcing an End-of-Sale (EOS) for the ACM4000T Automatic Calibration Module. This product is no longer available for purchase as of May 1st, 2023. We will provide service and repair for this instrument for a minimum of 3 years from the EOS date and based on parts availability afterwards.
ACM4000T is an automatic calibration module that can be used with all CMT Vector Network Analyzers operating in frequency range up to 4 GHz. It is a fully automatic USB-controlled and powered electronic calibration module. Minimizing the number of steps required by technicians reduces the risk of human error and expedites the calibration process. Automating the calibration routine also reduces wear and tear on the analyzer and RF cables. To perform full two-port calibration, each end of the ACM need only be connected to the analyzer once, as opposed to seven connections with a traditional calibration. The ACM also contains a factory characterized 20dB in-line attenuator which acts as a simulated device under test (DUT). The confidence check feature loads the factory stored DUT into memory so proper calibration can be verified.
- ACM4000T Automatic Calibration Module
- Frequency Range: 20 kHz to 4 GHz
- Impedance: 75 Ohm
If you want to consult with our engineers about your specific application, please Ask an Engineer.
Virtually interact with CMT’s software to complete a simulated calibration of a 2-port VNA.
Software
Virtually interact with CMT’s software to complete a simulated calibration of a 2-port VNA.
Datasheet
Manuals
