Display | Print | Files | Analysis | Marker | Average | Calibration
Stimulus | Trigger | Scale | Channels | Trace | System | Devices* | Remote Only
Time Domain: Cable Correction | Gating | Fixture Simulator: Port Z Conversion | De-Embedding | Embedding | Conversion | Limit Test | Ripple Test | Trace Analysis
note |
This icon This icon Comments are in italics. |
indicates a read only command. This icon 
indicates a write only command.
Time Domain |
||
|---|---|---|
Time Domain (ON/OFF) |
||
Start |
||
Stop |
||
Center |
||
Span |
||
Unit |
||
Reflection Type |
||
Response Type |
Bandpass/Lowpass. |
|
Impulse/Step |
||
Set Frequency Low Pass |
||
Impulse width (Bandpass / Lowpass Impulse) |
||
Step rise time ( Lowpass Step) |
||
Kaiser–Bessel β |
||
Cable Loss Correction (Time Domain) |
||
|---|---|---|
Cable Loss Correction (ON/OFF) |
||
Cable Type |
Select |
|
Recall Cable List |
||
Number of cables in the cable list |
||
Velocity Factor |
||
Loss |
||
Frequency |
||
Gating |
|
|---|---|
Gating (ON/OFF) |
|
Start |
|
Stop |
|
Center |
|
Span |
|
Type (BandPass | Notch) |
|
Shape (Minimum | Normal | Wide | Maximum) |
|
Port Z Conversion (Fixture Simulator) |
|
|---|---|
Port ZConversion (ON/OFF) |
|
Port Z0 |
|
De-Embedding (Fixture Simulator) |
|
|---|---|
De-Embedding (ON/OFF) |
|
S–parameters File |
|
Embedding (Fixture Simulator) |
|
|---|---|
Embedding (ON/OFF) |
|
S–parameters File |
|
Conversion |
|
|---|---|
Conversion (ON/OFF) |
|
Function (Impedance Z | Admittance Y | Inverse 1/S | Conjugation) |
|
Limit Test |
|
|---|---|
Limit Test (ON/OFF) |
|
Limit Line (ON/OFF) |
|
Fail Sign (ON/OFF) |
|
Stimulus Offset |
|
Response Offset |
|
Edit Limit Line |
|
Save Limit Table |
|
Restore Limit Table |
|
Limit test result |
|
Limit test result report |
|
Failed points |
|
Stimulus values of failed points |
|
Ripple Test |
|
|---|---|
Ripple Test (ON/OFF) |
|
Limit Line (ON/OFF) |
|
File Sign (ON/OFF) |
|
Edit Ripple Limit |
|
Save Ripple Table |
|
Restore Ripple Table |
|
Ripple limit test result |
|
Ripple limit test result report |
|
Trace Analysis
|
|
|---|---|
Analysis type |
|
Execute analysis |
|
Analysis result data array |
|
Arbitrary sweep range (ON/OFF) |
|
Analysis range start |
|
Analysis range stop |
|
Coupling range (ON/OFF) |
|
Lower limit for the peak excursion value |
|
Number of points (data pairs) |
|
Peak polarity |
|
Target level |
|
Transition type |
|
