SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0[:R] <numeric>
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0[:R]?
Description
Sets or reads out the value of the impedance of the port impedance conversion function. The function sets the real part and zeros the imaginary part of the port impedance. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1] … |16} (in N-port mode only)
<Pt>=1
<Pt>={[1] … |16}
Parameter
<impedance> the impedance value from 1e–6 to 1e10
Unit
Ω (Ohm)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
50 Ω
Equivalent Softkeys
Analysis > Fixture Simulator > Port Z0
Equivalent COM Command
SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R
Syntax
Value = app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R = 50
Type
Double (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
