SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:STATe {OFF|ON|0|1}
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:STATe?
Description
Turns the port impedance conversion function ON/OFF. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1] … |16} (in N-port mode only)
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Fixture Simulator > Port ZConversion
Equivalent COM Command
SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.STATe
Syntax
Status = app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.STATe
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.STATe = True
Type
Boolean (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1