SCPI Command
CALCulate<Ch>[:SELected]:RLIMit:DATA <numeric list>
CALCulate<Ch>[:SELected]:RLIMit:DATA?
Sets the data array, which is the limit line for the ripple limit function. The array size is 1 + 4N, where N is the number of limit line segments. For the n–th point, where n from 1 to N: <numeric 1> the number of limit line segments N is the integer from 0 to 12. Setting 0 clears the limit line. <numeric 4n–2> type of the n–th limit line segment 0: Off. 1: On <numeric 4n–1> the stimulus value in the beginning point of the n–th segment <numeric 4n–0> the stimulus value in the end point of the n–th segment <numeric 4n+1> the ripple limit value of the n–th segment. Note: If the array size is not 1 + 4N, where N is <numeric 1>, an error occurs. If <numeric 4n–2> is less than 0 or more than 1, an error occurs. When <numeric 4n–1>, <numeric 4n–0>, and <numeric 4n+1> elements are out of allowable range, the value is set to the limit, which is closer to the specified value. |
---|
command/query |
The active trace of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<numeric 1>, <numeric 2>, …<numeric 4N+1>
Analysis > Ripple Test > Edit Ripple Limit
Equivalent COM Command
SCPI.CALCulate(Ch).SELected.RLIMit.DATA
Data = app.SCPI.CALCulate(Ch).SELected.RLIMit.DATA
app.SCPI.CALCulate(Ch).SELected.RLIMit.DATA = Array(1,1,800,900,10)
Variant (array of Double) (read only)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)