SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:PMCircuit:PORT<Pt>:STATe {OFF|ON|0|1}
CALCulate<Ch>:FSIMulator:SENDed:PMCircuit:PORT<Pt>:STATe?
Description
Turns the 2-port network embedding function for each port ON/OFF. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1] … |16} (in N-port mode only)
<Pt>=1
<Pt>={[1] … |16}
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Fixture Simulator > Embedding
Equivalent COM Command
SCPI.CALCulate(Ch).FSIMulator.SENDed.PMCircuit.PORT(Pt).STATe
Syntax
Status = app.SCPI.CALCulate(Ch).FSIMulator.SENDed.DEEMbed.PORT(Pt).STATe
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.DEEMbed.PORT(Pt).STATe = True
Type
Boolean (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1