Please enable JavaScript to view this site.

Network Analyzers using TRVNA software

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Programming > Command Reference > Command Finder (From User Interface)

Analysis

Scroll Contact Us Home Prev Top Next More

Stimulus | Response | Scale | Calibration | Channel | Trace | Markers | Analysis | Display | System | Remote Only

Time Domain: Cable Correction | Gating | Fixture Simulator: Port ZConversion | De-Embedding | Embedding | Conversion | Limit Test | Ripple Limit | Trace Analysis

note	This icon indicates a read only command. This icon indicates a write only command. This icon indicates command(s) without equivalent softkeys. Comments are in italics.

Time Domain
Time Domain (ON/OFF)		CALC:TRAN:TIME:STAT
Unit (Time \| Metric \| Imperial)		CALC:TRAN:TIME:UNIT
Reflection Type (One Way \| Round Trip)		CALC:TRAN:TIME:REFL:TYPE
Start		CALC:TRAN:TIME:STAR
Stop		CALC:TRAN:TIME:STOP
Center		CALC:TRAN:TIME:CENT
Span		CALC:TRAN:TIME:SPAN
Response Type	Bandpass/Lowpass	CALC:TRAN:TIME
Response Type	Impulse/Step	CALC:TRAN:TIME:STIM
Window > Impulse Width	Bandpass/Lowpass Impulse	CALC:TRAN:TIME:IMP:WIDT
Window > Impulse Width	Lowpass Step	CALC:TRAN:TIME:STEP:RTIM
Kaiser-Beta		CALC:TRAN:TIME:KBES
Sets Frequency Low Pass		CALC:TRAN:TIME:LPFR

Cable Correction (Time Domain)
Cable Correction (ON/OFF)		SENS:CORR:TRAN:TIME:STAT
Select Cable	Select	SENS:CABL:SEL
	Recall Cable List	MMEM:LOAD:CBL
	Number of cables in the list	SENS:CABL:COUN?
Velocity Factor		SENS:CORR:TRAN:TIME:RVEL
Cable Loss		SENS:CORR:TRAN:TIME:LOSS
Frequency		SENS:CORR:TRAN:TIME:FREQ

Gating
Gating (ON/OFF)	CALC:FILT:TIME:STAT
Start	CALC:FILT:TIME:STAR
Stop	CALC:FILT:TIME:STOP
Center	CALC:FILT:TIME:CENT
Span	CALC:FILT:TIME:SPAN
Type (Bandpass \| Notch)	CALC:FILT:TIME
Shape (Minimum \| Normal \| Wide \| Maximum)	CALC:FILT:TIME:SHAP

Port ZConversion (Fixture Simulator)
Port ZConversion (ON/OFF)	CALC:FSIM:SEND:ZCON:STAT
Port n Z0	CALC:FSIM:SEND:ZCON:PORT:Z0

De-Embedding (Fixture Simulator)
S-parameters File	CALC:FSIM:SEND:DEEM:PORT:USER:FIL
Port n (ON/OFF)	CALC:FSIM:SEND:DEEM:PORT:STAT

Embedding (Fixture Simulator)
S-parameters File	CALC:FSIM:SEND:PMC:PORT:USER:FIL
Port n (ON/OFF)	CALC:FSIM:SEND:PMC:PORT:STAT

Conversion
Conversion (ON/OFF)	CALC:CONV
Function (Impedance Z \| Admittance Y \| Inverse 1/S \| Conjugation)	CALC:CONV:FUNC

Limit Test
Limit Test (ON/OFF)	CALC:LIM
Limit Line (ON/OFF)	CALC:LIM:DISP
Fail Sign (ON/OFF)	DISP:FSIG
Edit Limit Line	CALC:LIM:DATA
Save Limit Table	MMEM:STOR:LIM
Restore Limit Table	MMEM:LOAD:LIM
Stimulus Offset	CALC:LIM:OFFS:STIM
Response Offset	CALC:LIM:OFFS:AMPL
Limit test result	CALC:LIM:FAIL?
Limit test result report	CALC:LIM:REP:ALL?
Number of failed points	CALC:LIM:REP:POIN?
Stimulus values of failed points	CALC:LIM:REP?

Ripple Limit
Ripple Test (ON/OFF)	CALC:RLIM
Limit Line (ON/OFF)	CALC:RLIM:DISP:LINE
Fail Sign (ON/OFF)	DISP:FSIG
Edit Ripple Limit	CALC:RLIM:DATA
Save Ripple Limit Table	MMEM:STOR:RLIM
Restore Ripple Limit Table	MMEM:LOAD:RLIM
Ripple limit test result	CALC:RLIM:FAIL?
Ripple limit test result report	CALC:RLIM:REP?

Trace Analysis
Analysis type	CALC:FUNC:TYPE
Execute analysis	CALC:FUNC:EXEC
Analysis result data array	CALC:FUNC:DATA?
Arbitrary sweep range (ON/OFF)	CALC:FUNC:DOM
Analysis range start	CALC:FUNC:DOM:STAR
Analysis range stop	CALC:FUNC:DOM:STOP
Coupling range (ON/OFF)	CALC:FUNC:DOM:COUP
Lower limit for the peak excursion value	CALC:FUNC:PEXC
Number of points (data pairs)	CALC:FUNC:POIN?
Peak polarity	CALC:FUNC:PPOL
Target level	CALC:FUNC:TARG
Transition type	CALC:FUNC:TTR

© 2024 Copper Mountain Technologies, LLC

Rev.: 24.1