Network Analyzers using TRVNA software

Sets the data array, which is the limit line in the limit test function.

The array size is 1 + 5N, where N is the number of limit line segments.

For the n-th point, where n from 1 to N:

<numeric 1>           the number of limit line segments N is from 0 to 100. Setting 0 clears the limit line

<numeric 5n–3>     type of the n-th limit line segment:

0: Off

1: Upper limit

2: Lower limit

3: Single Point limit

<numeric 5n–2>      the stimulus value in the start point of the n-th segment

<numeric 5n–1>      the stimulus value in the end point of the n-th segment

<numeric 5n–0>      the response value in the start point of the n-th segment

<numeric 5n+1>      the response value in the end point of the n-th segment

Note: If the array size is not 1 + 5N, where N is <numeric 1>, an error occurs. If <numeric 5n–3> is less than 0 or more than 2, an error occurs. When <numeric 5n–2>, <numeric 5n–1>, <numeric 5n–0>, and <numeric 5n+1> elements are out of allowable range, the value is set to the limit, which is closer to the specified value.