SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0[:R] <numeric>
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0[:R]?
Description
Sets or reads out the value of the impedance of the port impedance conversion function. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...9}
<Pt>={[1]|2}
Parameter
<numeric> the impedance value from 1e–6 to 1e10
Unit
Ω (Ohm)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
50 Ω
Equivalent Softkeys
Analysis > Fixture Simulator > Port Z Conversion > Port n Z0
Equivalent COM Command
SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R
Syntax
Value = app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R = 50
Type
Double (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
