Please enable JavaScript to view this site.

 Network Analyzers using S2VNA software

The Module differ in operating frequency range and in the number of ports. Their functional features are briefly described in the table below.

During calibration, the Modules are controlled by the VNA software installed on the connected PC. The USB 2.0 interface is used for control.

The Modules feature several hardware configurations depending on the connector types of PORT A, PORT B and, if available, PORT C and PORT D. To view the possible connector type front and side views for each Module, click on the name of the desired Module in the table below.

The Module delivery package is specified in Delivery Kit.

Functional Features

Module

Frequency range

Supported calibrations

Features

50 Ohm two-port Modules

ACM2506

20 kHz to 6.5 GHz

Full one-port

One-path two-port

Full two-port

Unknown thru

Thermal compensation

User characterization

Automatic orientation

Confidence check

ACM2509

20 kHz to 9 GHz

ACM2520

100 kHz to 20 GHz

ACM2543

10 MHz to 44 GHz

ACM6000T

20 kHz to 6 GHz

ACM8000T

100 kHz to 8 GHz

75 Ohm two-port Modules

ACM2708

20 kHz to 8 GHz

Full one-port

One-path two-port

Full two-port

Unknown thru

Thermal compensation

User characterization

Automatic orientation

Confidence check

ACM4000T

20 kHz to 4 GHz

50 Ohm four-port Modules

ACM4509

100 kHz to 9 GHz

Full one-port

One-path two-port

Full two-port

Unknown thru

Thermal compensation

User characterization

Automatic orientation

Confidence check

ACM4520

100 kHz to 20 GHz

ACM8400T

100 kHz to 8 GHz

1 The upper frequency point of ACM2520 and ACM4520 with type N connectors is 18 GHz.

2 The upper frequency point of ACM2543 with 2.92 mm connectors is 40 GHz.

Rev.:  24.2