SCPI Command
SENSe<Ch>:CORRection:EXTension:AUTO:STOP <frequency>
SENSe<Ch>:CORRection:EXTension:AUTO:STOP?
Description
Sets or reads out the stop value of the user span of the auto port extension function. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]|2|...16} (in N-port mode only)
Parameter
<frequency> the user span stop
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The Analyzer's lowest frequency.
Related Commands
Equivalent Softkeys
Calibration > Port Extensions > Auto Port Extension > Frequency 2
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.AUTO.STOP
Syntax
Value = app.SCPI.SENSe(Ch).CORRection.EXTension.AUTO.STOP = 1e9
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1