SCPI Command
SENSe<Ch>:CORRection:EXTension:PORT<Pt>:FREQuency{[1]|2} <frequency>
SENSe<Ch>:CORRection:EXTension:PORT<Pt>:FREQuency{[1]|2}?
Description
Sets or reads out the values of the frequency 1 and frequency 2 to calculate the loss for the port extension function. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Pt>=1
<Pt>={[1]…|16} (in N-port mode only)
Parameter
<frequency> the frequency value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1E9
Equivalent Softkeys
Calibration > Port Extension > {Freq1 | Freq2}
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).FREQuency(Ls)
Syntax
Value = app.SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).FREQuency(Ls)
app.SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).FREQuency(Ls) = 100Е6
Type
Boolean (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
