The trigger source determines where the trigger signals originate. One of three trigger sources can be selected. This setting works at the analyzer level.
Trigger Source |
Function |
---|---|
Internal [default] |
The Analyzer generates a trigger signal automatically when needed. |
External (except TR1300/1 model) |
A trigger signal is a logic signal at the external trigger input (See External Trigger Settings). |
Bus |
The trigger signal is generated by a command from the program controlling the Analyzer via SCPI or COM. |
To set the trigger source, use the following softkeys: Stimulus > Trigger > Trigger Source Then select the required trigger source: •Internal •External (except TR1300/1 model) •Bus |
|
|