SCPI Command
TRIGger[:SEQuence]:SOURce <char>
TRIGger[:SEQuence]:SOURce?
Description
Selects the trigger source (See options below). If the Continuous trigger initiation mode is enabled with the command INIT:CONT ON, the INTernal choice leads to continuous sweep. The choice of another option switches the analyzer to the trigger waiting state from the corresponding source. If the Continuous trigger initiation mode is disabled with the command INIT:CONT OFF, the reaction to INIT command is different. Selecting INTernal leads to a single sweep in response to the command INIT, selection another option puts the analyzer in a single trigger waiting state in response to the INIT command. |
|---|
command/query |
Parameter
<char> choose from:
INTernal |
Internal |
EXTernal |
External (hardware trigger input; except TR1300/1 model) |
BUS |
Bus (program) |
Query Response
{INT|EXT|BUS}
Preset Value
INT
Related Commands
Equivalent Softkeys
Stimulus > Trigger > Trigger Source > {Internal | External | Bus}
Equivalent COM Command
SCPI.TRIGger.SEQuence.SOURce
Syntax
app.SCPI.TRIGger.SEQuence.SOURce
app.SCPI.TRIGger.SEQuence.SOURce = "BUS"
Type
String (read/write)
Back to TRIGger
Back to Command Finder
Back to Command Finder (From User Interface)
