Network Analyzers using TRVNA software

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Programming > Command Reference > INITiate

INIT:CONT

Scroll Contact Us Home Prev Top Next More

SCPI Command

INITiate:CONTinuous {OFF|ON|0|1}

INITiate:CONTinuous?

Description

Turns the continuous trigger initiation mode ON/OFF. When the continuous initiation mode is turned ON: •If the Internal trigger source is selected by the command TRIG:SOUR INT, then all channels are continuously sweeps in turn. •If the trigger source selected is one other than the internal, then the analyzer trigger system goes to the trigger waiting state. Upon receipt of a trigger from the selected source, the sweep starts for the all channels in turn. On completion of the sweep the analyzer trigger system goes to the trigger waiting state. When the continuous trigger initiation mode is turned OFF the analyzer trigger system is in the Hold state, to initiate a sweep use the INIT command.
command /query

Turns the continuous trigger initiation mode ON/OFF.

When the continuous initiation mode is turned ON:

•If the Internal trigger source is selected by the command TRIG:SOUR INT, then all channels are continuously sweeps in turn.

•If the trigger source selected is one other than the internal, then the analyzer trigger system goes to the trigger waiting state. Upon receipt of a trigger from the selected source, the sweep starts for the all channels in turn. On completion of the sweep the analyzer trigger system goes to the trigger waiting state.

When the continuous trigger initiation mode is turned OFF the analyzer trigger system is in the Hold state, to initiate a sweep use the INIT command.

command /query