SCPI Command
SENSe<Ch>:CORRection:COLLect[:ACQuire]:ECAL2 <port 1>,<port 2>
Description
Executes a calibration step using a two-port ACM connecting <port 1> and <port 2> when performing a full three-port or four-port calibration. This step must be performed between different pairs of ports in such a way that there is at least one ACM connection to each port. The other pairs of ports can be optionally measured with a THRU (see SENS:CORR:COLL:ECAL2:THRU) The calibration is completed by the SENS:CORR:COLL:ECAL2:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port 1> |
The number of the first port from 1 to 4 |
<port 2> |
The number of the second port from 1 to 4 |
Out of Range
If the same port numbers are specified, an error occurs.
Equivalent Softkeys
Calibration > AutoCal > 3-Port AutoCal > 2-Port AutoCal Module > n-m AutoCal
Calibration > AutoCal > 4-Port AutoCal > 2-Port AutoCal Module > AutoCal > n-m AutoCal
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
