SCPI Command
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:POLarity {POS|NEG}
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:POLarity?
Sets the polarity of pulses for pulse generator PG1...PG6. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
---|
command/query |
Channel <Ch> = {[1]|2| ... 16},
Generator <pg> = {1|2|3|4|5|6|7}
<char> pulse polarity:
POS |
Positive |
NEG |
Negative |
POS
Stimulus > Pulse Meas > Advanced Settings... -> Pulse Generators -> Polarity -> {POS | NEG}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)