SCPI Command
SENSe<ch>:PLS2:ADVanced:APPLy
Activates commands from the SENSe:PLS2:ADVanced branch sent to the analyzer before this command. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
---|
no query |
Channel <Ch> = {[1]|2| ... 16}
Stimulus > Pulse Meas > Advanced Settings... > Apply
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)