SCPI Command
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:EDGE {POS|NEG}
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:EDGE?
Description
Sets the active edge of the trigger to start the pulse generator PG1...PG6. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16},
Generator <pg> = {1|2|3|4|5|6|7}
Parameter
<char> active edge of the trigger:
POS |
Positive (rising edge) |
NEG |
Negative (falling edge) |
Query Response
{POS|NEG}
Preset Value
POS
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Advanced Settings... -> Pulse Generators -> Edge -> {POS | NEG}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
Rev.: 24.1