SCPI Command
SENSe<ch>:PLS2:ADVanced:LINK:SYNC2 {PGEN1...PGEN7}
SENSe<ch>:PLS2:ADVanced:LINK:SYNC2?
Description
Sets the signal source for the Sync2 line. The signal source is determined by the command parameter. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16}
Parameter
Sets the signal source for the Sync2 line:
PGEN1...PGEN7 |
Generator PG1...PG7 |
Query Response
{PGEN1...PGEN7}
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Advanced Settings... > Sync 2 -> {source}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
Rev.: 24.1