SCPI Command
SENSe<ch>:PLS2:ADVanced:LINK:MEAS {PGEN1...PGEN7|SYNC1}
SENSe<ch>:PLS2:ADVanced:LINK:MEAS?
Description
Sets the signal source at the input of the measurement trigger. The command parameter determines the signal source. The rising edge of the signal triggers a measurement with a width determined by the bandwidth of the digital IF filter. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16}
Parameter
<char> signal source for the measurement trigger:
PGEN1...PGEN7 |
Generator PG1...PG7 |
SYNC1 |
Internal line SYNC1 |
Query Response
{PGEN1...PGEN7|SYNC1}
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Advanced Settings... > Sampling Start -> {source}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
