SCPI Command
SENSe<Ch>:CORRection:COLLect:SAVE
Calculates the calibration coefficients from the calibration standards measurements depending on the selected calibration type. The calibration type is selected by one of commands SENS:CORR:COLL:METH:XXXX. On completion of the command, all the calibration standards measurements are cleared, and the error correction automatically turns ON. At the attempt to execute this command before all the needed standards are measured, an error occurs, and the command is ignored. |
---|
no query |
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
Calibration type selection:
Calibration standards measurement:
Calibration > { Open | Short | Load } > Apply
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.SAVE
app.SCPI.SENSe(Ch).CORRection.COLLect.SAVE
Method
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)