SCPI Command
SENSe<Ch>:CORRection:COLLect:METHod:TYPE?
Reads out the calibration method selected for the calculation of the calibration coefficients on completion of the calibration executed by the SENS:CORR:COLL:SAVE command. |
---|
query only |
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
ST |
Scalar Thru (in N-port mode only) |
RO |
Response (Open) |
RS |
Response (Short) |
F1 |
Full one-port calibration |
F1ST |
Full 1-port calibration + Scalar Thru (in N-port mode only) |
F2ST2 |
Full 2-port calibration + Scalar Thru (in N-port mode only) |
MATH |
Calculated Full 2-port calibration + Scalar Thru (in N-port mode only) |
NONE |
Not defined |
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.METHod.TYPE
Param = app.SCPI.SENSe(Ch).CORRection.COLLect.METHod.TYPE
String (read only)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)