SCPI Command
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:HWRatio <numeric>
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:HWRatio?
Sets or reads out the waveguide height to width ratio value for the calibration standard. |
---|
command/query |
Standard <Std> of the calibration kit specified for channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Std>={[1]|2|...K}, where K — the number of the standards in the calibration kit
<numeric> the waveguide height to width ratio value
Sets the value of the limit, which is closer to the specified value.
<numeric>
Calibration > Calibration Kit > Edit Cal Kit > H/W
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)