SCPI Command
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:FMINimum <numeric>
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:FMINimum?
Description
Sets or reads out the minimum frequency limit of the calibration standard. |
|---|
command/query |
Target
Standard <Std> of the calibration kit specified for channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Std>={[1]|2|...N}, where N — the number of the standards in the calibration kit
Parameter
<numeric> the minimum frequency limit form 0 to 1E14
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Calibration Kit > Edit Cal Kit > F min
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).FMINimum
Syntax
Value = app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).FMINimum
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).FMINimum = 3E9
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
