SCPI Command
SENSe<Ch>:CORRection:COEFficient:SAVE
Description
Enables the written calibration coefficients depending on the selected calibration type. On completion of the command, the error correction automatically turns ON. Executing this command before all necessary calibration coefficients have been written will result in an error and the command will be ignored. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
Related Commands
Calibration type selection:
SENS:CORR:COEF:METH:THRU (in N-port mode only)
Calibration coefficient writing:
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COEFficient.SAVE
Syntax
app.SCPI.SENSe(Ch).CORRection.COEFficient.SAVE
Type
Method
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1