SCPI Command
SENSe<Ch>:CORRection:COEFficient:METHod[:RESPonse]:THRU <rcvport>, <srcport>
Selects the ports and sets the response calibration (Thru) type when the written calibration coefficients are made effective by the SENS:CORR:COEF:SAVE command. (in N-port mode only) |
---|
no query |
Channel <Ch>,
<Ch>={[1]|2|...16}
<rcvport> |
The number of the receiver port from 1 to 16 |
<srcport> |
The number of the source port from 1 to 16 |
If the same port numbers are specified, an error occurs.
None
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)