SCPI Command
SENSe<Ch>:CORRection:COLLect:SAVE
Description
Calculates the calibration coefficients from the calibration standards measurements depending on the selected calibration type. The calibration type is selected by one of commands SENS:CORR:COLL:METH:XXXX. On completion of the command, all the calibration standards measurements are cleared, and the error correction automatically turns ON. At the attempt to execute this command before all the needed standards are measured, an error occurs, and the command is ignored. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Related Commands
Calibration type selection:
Calibration standards measurement:
Equivalent Softkeys
Calibration > Calibrate > Response (Open) | Respose (Short) | Response (Thru) | 1-port SOL Cal | One Path 2-Port Cal |n-Port SOLT Cal. | n-Port TRL Cal > Apply
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
