SCPI Command
SENSe<Ch>:CORRection:COLLect[:ACQuire]:TRLReflect <port>
Description
Measures the calibration data of the TRL reflect standard for the specified port. Note: The command starts the measurement immediately if the trigger source for calibration set to the "Internal" by the command SENS:CORR:TRIG:FREE, otherwise waits for the trigger signal. The command blocks the execution of the subsequent commands until the completion of the measurement. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port> |
The number of the port from 1 to 2 |
Equivalent Softkeys
Calibration > Calibrate > n–Port TRL Cal > Reflect
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3