SCPI command
AFR:CALCulate:STEP<Step>:REFlect:OFFSet <numeric>
Описание
1xReflect method. Sets the offset value of the fixture calibration plane in the <Step> measurement step. First, activate the calibration plane offset mode by the AFR:SYST:STEP<Step>:REF:OFFS 1 command. |
|---|
no query |
Target
Value of the calibration plane offset at the <Step> measurement step,
<Step> = {1|2|...}
Parameter
<numeric> offset value, is specified in picoseconds
Related commands
SYSTem:STEP<Step>:REFlect:OFFSet
Related Controls of User Interface
Fixture measurement > Step <Step> из N > Apply fixture calibration plane offset
N - maximum number of steps.
Back to AFR:CALCulate
Rev.: 22.2.1