SCPI Command
AFR:SYSTem:STEP<Step>:REF:OFFS {OFF|ON|0|1}
Description
Sets the offset mode of the fixture calibration plane at the <Step> measurement step. 1xReflect method. To set the offset value, use the AFR:CALC:STEP<Step>:REF:OFFS command. |
|---|
no query |
Target
Measurement step <Step>,
<Step> = {1|2|...}
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Related Commands
AFR:CALCulate:STEP<Step>:REFlect:OFFSet <numeric>
Related Controls of User Interface
Fixture measurement > Step <Step> of N > Apply fixture calibration plane offset
N - maximum number of steps.
Rev.: 22.2.1