SCPI Command
AFR:CALCulate:STEP<Step>:THRU:OFFset <numeric 1>,<numeric 2>
Description
2xThrough method. Sets the offset values of the fixture calibration plane at the <Step> measurement step. First, activate the calibration plane offset mode by the AFR:SYST:STEP<Step>:THRU:OFFS 1 command. |
|---|
no query |
Target
Offset value of the calibration plane at the measurement step <Step>,
<Step> = {1|2|...}
Parameter
<numeric 1> |
Left fixture offset, is specified in picoseconds |
<numeric 2> |
Right fixture offset, is specified in picoseconds |
Related Commands
AFR:SYSTem:STEP<Step>:THRU:OFFSet
Related Controls of User Interface
Fixture measurement > Step <Step> of N > 2xThrough method > Apply fixture F1/F2 calibration plane offset,
F1 - name of the left fixture,
F2 - name of the right fixture,
N - maximum number of steps.
Back to AFR:CALCulate
Rev.: 22.2.1