SCPI Command
SENSe<Ch>:FREQuency:STOP <frequency>
SENSe<Ch>:FREQuency:STOP?
Description
Sets or reads out the stimulus stop value of the sweep range for linear or logarithmic sweep type. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<frequency> the stimulus stop value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The maximum frequency limit of the analyzer.
Equivalent Softkeys
Stimulus > Stop
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.STOP
Syntax
Value = app.SCPI.SENSe(Ch).FREQuency.STOP
app.SCPI.SENSe(Ch).FREQuency.STOP = 1E6
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1