SCPI Command
SENSe<Ch>:FREQuency:STARt <frequency>
SENSe<Ch>:FREQuency:STARt?
Description
Sets or reads out the stimulus start value of the sweep range for linear or logarithmic sweep type. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<frequency> the stimulus start value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The minimum frequency span of the analyzer
Equivalent Softkeys
Stimulus > Start
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.STARt
Syntax
Value = app.SCPI.SENSe(Ch).FREQuency.STARt
app.SCPI.SENSe(Ch).FREQuency.STARt = 1E6
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1