SCPI Command
SENSe<Ch>:FREQuency:CENTer <frequency>
SENSe<Ch>:FREQuency:CENTer?
Description
Sets or reads out the stimulus center value of the sweep range for linear or logarithmic sweep type. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<frequency> the stimulus center value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The center frequency of the analyzer
Equivalent Softkeys
Stimulus > Center
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.CENTer
Syntax
Value = app.SCPI.SENSe(Ch).FREQuency.CENTer
app.SCPI.SENSe(Ch).FREQuency.CENTer = 1E9
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1