SCPI Command
SENSe<Ch>:FREQuency[:CW] <frequency>
SENSe<Ch>:FREQuency[:FIXed] <frequency>
SENSe<Ch>:FREQuency[:CW]?
SENSe<Ch>:FREQuency[:FIXed]?
Description
Sets or reads out the fixed frequency value when the power sweep type is selected. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<frequency> the frequency value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The minimum frequency limit of the analyzer.
Equivalent Softkeys
Stimulus > Power > CW Freq
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.CW
Syntax
Value = app.SCPI.SENSe(Ch).FREQuency.CW
app.SCPI.SENSe(Ch).FREQuency.CW = 1E9
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1