SCPI Command
SENSe<Ch>:CORRection:COLLect:METHod[:RESPonse]:THRU <rcvport>,<srcport>
Description
Selects the ports and sets the response calibration (Thru) type for the calculation of the calibration coefficients on completion of the calibration executed by the SENS:CORR:COLL:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<rcvport> |
The number of the receiver port is always 2 |
<srcport> |
The number of the source port is always 1 |
Out of Range
If an incorrect port number is specified, an error occurs. If the same port numbers are specified, an error occurs. The command is ignored.
Related Commands
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.METHod.RESPonse.THRU
Syntax
app.SCPI.SENSe(Ch).CORRection.COLLect.METHod.RESPonse.THRU = Array(2,1)
Type
Variant (array of Long) (write only)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
