SCPI Command
SENSe<ch>:PLS2:PGEN<pg>[:STATe] {OFF|ON}
SENSe<ch>:PLS2:PGEN<pg>[:STATe]?
Description
Turns the connection of the output of the pulse generator PG4...PG6 with the corresponding Trig4...Trig6 connector ON/OFF. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16},
Generator <pg> = {4|5|6}
Parameter
{ON|1} |
Connection ON |
{OFF|0} |
Connection OFF |
Query Response
{0|1}
Preset Value
0
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse Generator Outputs > PG n (Trig f) > {ON | OFF}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
Rev.: 24.1