SCPI Command
SENSe<ch>:PLS2:MEASurement:DELay <numeric>
SENSe<ch>:PLS2:MEASurement:DELay?
Description
Sets the measurement start delay relative to the pulse trigger. Used in the “Point in pulse”, “Pulse to pulse” modes to align the measurement position within the modulation pulse. Note: The modulated RF pulse has a delay relative to the start of the measurement due to the RF signal delay in the modulator and ADC. The typical value of this delay is 400 ns for a fast modulator, and 1.2 µs for a normal modulator. It is recommended to set the measurement delay to at least the specified value to compensate for the delay in the modulator and ADC. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16}
Parameter
<numeric> measurement start delay value.
Query Response
<numeric>
Unit
sec (second)
Resolution
20 ns
Preset Value
400 ns
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Meas Delay
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
